PET spunbond non woven fabrics covered ePTFE H11 membrane

Contact NowPTFE Hydrophilic MembranePTFE Hydrophilic Membranes with surface filtration mechanism, small apertures and high porosity feature. It has a lager flux that other filtration films can hardly reach. Therefore, the product is widely used in environmental protection, such as the industrial wastewater discharge of platinum,...Read More

Contact NowEPTFE 0.1um for PET Two-component Non-woven Fabrics PP Needled Felt PP Woven Scrim PP Spunbond Non-woven FabricsSano e-PTFE liquid filter film is a kind of hydrophilic filter film which uses ePTFE hydrophobic film by special chemical processes. So it has the features of surface filter mechanism and small pore size, high porosity, big flux. The film can bombine with any acupuncture, spunlace nonwoven...Read More

Contact NowEPTFE 1um for PET Two-component Non-woven Fabrics, PP Needled Felt PP Woven Scrim PP Spunbond Non-woven FabricsePTFE Auto Film is defined as: after two-way stretch forming process, change the pore aperture size to assess the level of waterproof and breathable (IP65 IP67), and with PET two-component non-woven and PP spun-bonded non-woven base material thermal compound, etc ePTFE 1um Specification ： 1.Code...Read More

Contact NowEPTFE Membrane for Aramid Fiber Needled Feltor PTFE feltor Glass Fiber Needle FeltSano e-PTFE air removing membrane filter material used needle felt,spunlace mat or woven which is produced by the well-known brand as a carrier. It uses the international leading composite technology (high-temperature compound, normal-temperature compound, dispensing compound)to make the film...Read More

Contact NowEPTFE 0.1um for PET Two-component Non-woven Fabrics PP Spunbond Non-woven FabricsePTFE Auto Film is defined as: after two-way stretch forming process, change the pore aperture size to assess the level of waterproof and breathable (IP65 IP67), and with PET two-component non-woven and PP spun-bonded non-woven base material thermal compound, etc ePTFE 0.1um Specification ：...Read More

Contact NowEPTFE Low Bubble Point Membrane for PP Spunlaced Non-woven Fabrics, PP Spunbond Non-woven FabricsePTFE low bubble point Specification： Code：SNDP-M-01 thickness：10-30um Width：260-1600mm Length：100-300m Pore size：0.6-1um Bubble point：0.02-0.04mpa （Differential pressure 0.2mpa） Flow rate：2-3s/100ml/m2 PH ：0-14 Material and Application FieldRead More

Contact NowEPTFE Over Height Bubble Point Membrane for PP Spunlaced Non-woven Fabrics PP Spunbond Non-woven FabricsePTFE over height bubble point Specification Code：SNCGP-M-04 thickness：50-60um Width：260-1600mm Length：100-200m Pore size：0.1um Bubble point：0.25-0.3mpa （Differential pressure 0.2mpa） Flow rate：18-35s/100ml/m2 PH ：0-14 Material and Application FieldRead More

Contact NowEPTFE Membrane for High Temperature in Glass Scrim Basalt Woven FabricSano e-PTFE air removing membrane filter material used needle felt,spunlace mat or woven which is produced by the well-known brand as a carrier. It uses the international leading composite technology (high-temperature compound, normal-temperature compound, dispensing compound)to make the film...Read More