eptfe membrane for Sterilization filter

Contact NowEPTFE High Bubble Point Membrane for PP Spunlaced Non-woven Fabrics PP Spunbond Non-woven FabricsePTFE high bubble point Specification Code：SNGP-M-03 thickness：40-50um Width：260-1600mm Length：100-300m Pore size：0.2um Bubble point：0.14-0.18mpa （Differential pressure 0.2mpa） Flow rate：7-12s/100ml/m2 PH ：0-14 Material and Application FieldRead More

Contact NowPTFE Bacteria Separation FilmPTFE bacteria separation films are made with 100% imported PTFE dispersed resin without adding any substances through special processing. After double-direction stretching, the films are made out with compact, smooth and porous status. When the aperture diameter is established at the status of...Read More

Contact NowEPTFE Sdterilization And Efficient Bubble FilmPTFE bactericidal high efficiency bubble point membrane is a compact, smooth and porous film made of special technology through mechanical biaxially stretching. When the pore size of the membrane is formed into 0.2-0.5UM, the bacteria and blood can be isolated. The main principle of the membrane is to control the pore size of the membrane. The higher the bubble point, the smaller the aperture of the membrane. The smaller the bubble point, the bigger the aperture of the membrane. This product is widely used in the filtration of pharmaceutical, food, biological engineering and other industries.Read More

Contact NowPTFE Dust, Bacteria Of Masks Used In FilmPTFE air filter membrane PTFE air filter film is crystallized PTFE material in close to the melting temperature, extrusion film with quickly pulling speed, cooling after the film was the second extension drawing that the thin film has a three-dimensional structure. The diameter, thickness and...Read More

Contact NowEPTFE Middle Bubble Point Membrane for PP Spunlaced Non-woven Fabrics PP Spunbond Non-woven FabricsePTFE middle bubble point Specification Code：SNZP-M-02 thickness：30-40um Width：260-1600mm Length：100-300m Pore size：0.45um Bubble point：0.08-0.12mpa （Differential pressure 0.2mpa） Flow rate：4-6s/100ml/m2 PH ：0-14 Material and Application FieldRead More

Contact NowEPTFE Over Height Bubble Point Membrane for PP Spunlaced Non-woven Fabrics PP Spunbond Non-woven FabricsePTFE over height bubble point Specification Code：SNCGP-M-04 thickness：50-60um Width：260-1600mm Length：100-200m Pore size：0.1um Bubble point：0.25-0.3mpa （Differential pressure 0.2mpa） Flow rate：18-35s/100ml/m2 PH ：0-14 Material and Application FieldRead More

Contact NowEPTFE Low Bubble Point Membrane for PP Spunlaced Non-woven Fabrics, PP Spunbond Non-woven FabricsePTFE low bubble point Specification： Code：SNDP-M-01 thickness：10-30um Width：260-1600mm Length：100-300m Pore size：0.6-1um Bubble point：0.02-0.04mpa （Differential pressure 0.2mpa） Flow rate：2-3s/100ml/m2 PH ：0-14 Material and Application FieldRead More